Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

A Few Gopro Questions +k

profile picture
thisandthatfilms
Posts: 7713 - Karma: 525
ok so my number one question is if the 32 gig card will be more than enough for me. how bit are the files usually? will i be set for a day with all that?

number two is where is the best place to put the helmet mount

and last, i always see people with the pole mounts. are those hommade? or is it something like the rollbar mount from gopro?


thanks a lot boys


+k for good

-k for bad...

not that anyone even cares




Dec 25 2010 2:02PM
0 0
profile picture
A.Eberhard
Posts: 4426 - Karma: 415
Well the stats for recording time for a 32gb are on the site, but i'll post them here.
1080p (30 fps): 4h 21m 960p (30 fps): 5h 26m 720p (60 fps): 4h 21 720p (30 fps): 8h 09m WVGA (60 fps): 8h 09m.

With 32gb you will be just fine, your battery usually is done in 2 hours so you won't be able to fill it up much more then that.

For pole mounts, I don't know of any other ones then homemade ones. Mine is a ski pole with a flat adhesive mount epoxied to grip.
Dec 25 2010 2:26PM
0 0
profile picture
connoroh
Posts: 2333 - Karma: 246
i bought the seatpost mount for my poles.
Dec 25 2010 7:01PM
0 0
profile picture
WillStart
Posts: 3955 - Karma: 3,192
when i made my pole mount, i just stuck a curved sticky mount on the top of my ski pole handle. worked perfectly, but won't work for all poles obviously
Dec 25 2010 7:12PM
0 0
profile picture
icantskiiFILM
Posts: 2113 - Karma: 140
helmet mount usually goes on top =]
Dec 25 2010 11:07PM
0 0
profile picture
GreenHorn
Posts: 4896 - Karma: 1,209
32 gb is plenty

i use an 8 gb and ive never filled it up in one day

for the helmet mount, it can be kinda tricky. dont put it in the middle of your helmet, but dont put it close to the front. i would say right in between the middle and front, depending on how you want your shots to look. i like to be able to see the skis at all time, but also be able to see where the person is going. you'll figure it out.

and pole mounts are all different. you can even use the headstrap for a pole mount. there is a hole in the plastic piece by the go pro, that you can stick the end of your pole through. if you put it on there just right, it can stay and works really well. or get a handlebar mount and use it. if none of those work, i have a couple other ways. just let me know.

hope that helps
Dec 26 2010 12:23AM
0 0
profile picture
alexat955
Posts: 2732 - Karma: 112
ive been filming on and off all week with my 8gb and its not even 3/4 full yet
Dec 26 2010 12:46AM
0 0
profile picture
P4LSkier103
Posts: 235 - Karma: 16
32 GB flash is plenty, your battery will die normally before you fill up the memory.
Dec 26 2010 2:15AM
0 0
profile picture
P4LSkier103
Posts: 235 - Karma: 16
32 GB flash is plenty, your battery will die normally before you fill up the memory.
Dec 26 2010 2:16AM
0 0
profile picture
P4LSkier103
Posts: 235 - Karma: 16
32 GB flash is plenty, your battery will die normally before you fill up the memory. As for the pole mount, you can order it from (www.eyeofmine.com) or just make one. You might want to order the tripod mount if you plan to do so
Dec 26 2010 2:20AM
0 0
profile picture
SethLangbauer
Posts: 1119 - Karma: 74
i use a 4gb and i never fill it up.. just don't leave it running forever and you're set. the polemount works great being pointed at friends AND being pointed at you. for the helmet mount id mount it middle pretty close to the front of the helmet, so that if you point it down a bit the helmet doesn't get in the shot. evidence of how well the polemount works:

Dec 26 2010 8:16PM
0 0
profile picture
thisandthatfilms
Posts: 7713 - Karma: 525
some shots from today









Dec 26 2010 9:07PM
0 0
profile picture
icantskiiFILM
Posts: 2113 - Karma: 140
dont make the vig so noticable. its almost distracting. or just dont use it..
Dec 26 2010 10:05PM
0 0
profile picture
connory998
Posts: 1197 - Karma: 34
i wish my mountain was that empty.
Dec 26 2010 11:21PM
0 0
profile picture
abek
Posts: 1255 - Karma: 1,587
Pretty sick! Get a little closer and maybe make the vignette a little smaller and with less opacity! but not bad! Good job on the slow mo
Dec 27 2010 6:06PM
0 0
profile picture
[J_Gasper]
Posts: 2983 - Karma: 1,594
32 gb i think is dumb. i just got a 8gb and when im done uploading after the day i just delete everything on the card because its already on my computor. My helmet ount is about 1 inch and a half from the bottom of the helmet right on the front. about the pole, get the tripod mount for 8 bucks and buy a mono pod at target for 15 bucks and it works great.
hope it helped
Dec 27 2010 6:13PM
0 0
profile picture
teleTay
Posts: 2320 - Karma: 186
i used the curved adhesive mount, took one fall and it came off sending the gopro flying!

should i have let the adhesive cure or anything like that?
haha noob mistake if so
Dec 27 2010 6:43PM
0 0
profile picture
teleTay
Posts: 2320 - Karma: 186
on the front of my helmet, i liked the angle but it came off easyish? i guess dont know exactly how it came off other then the fact the i fell
Dec 27 2010 6:44PM
0 0
profile picture
GreenHorn
Posts: 4896 - Karma: 1,209
^ make sure your helmet isnt cold or anything. it should all be at room temperature. and let it sit for at least 24 hours before taking it outside.
Dec 27 2010 7:08PM
0 0
profile picture
teleTay
Posts: 2320 - Karma: 186
ya i put it on at room temp, but didnt let it sit, anyways i will put the other one on eventually
Dec 27 2010 7:19PM
0 0
profile picture
thisandthatfilms
Posts: 7713 - Karma: 525
mine actually fell off also, i think im going to appoxy it
Dec 27 2010 8:46PM
0 0
profile picture
icantskiiFILM
Posts: 2113 - Karma: 140
not dumb. what if hes on a weekend trip. he goes skiing all day. then he goes and skis the next day and the next day. he gets home to his computer with well over 8 GB. you on the other hand..will be conshyenshous about how much you shoot. he can shoot away with no worries and have tons of material to work with.
Dec 28 2010 10:55PM
0 0
profile picture
alexat955
Posts: 2732 - Karma: 112
i have 8 and i shot 4 days and only used 6 gb. and also thats what laptops are for
Dec 28 2010 11:48PM
0 0
profile picture
teleTay
Posts: 2320 - Karma: 186
just got mine for christmas, and i absolutely love it

some shots from yesterday, with the cam on a pole mount

shot in 720p 60fps

December 28th "Follow Cams" from tayalnes on Vimeo.

Dec 29 2010 10:22AM
0 0
profile picture
Peter.
Posts: 23796 - Karma: 13,012
you are wayyyyy too far away from the skier on those follows
Dec 29 2010 8:29PM
0 0
profile picture
MANDER
Posts: 4017 - Karma: 2,038
Since everyones putting there tests here:

Dec 29 2010 8:38PM
0 0
profile picture
ReedSkis~
Posts: 2122 - Karma: 98
Thoughts? I just downloaded the new firmware from GoPro's site and the color is noticeably more vivid...

Dec 29 2010 9:28PM
0 0
profile picture
ReedSkis~
Posts: 2122 - Karma: 98
^Watch in HD Please
Dec 29 2010 9:29PM
0 0
profile picture
Jacuse
Posts: 1792 - Karma: 1,549
Did you alter the footage at all or is that straight from the cam? Footage looks really good
Dec 29 2010 10:38PM
0 0
profile picture
ReedSkis~
Posts: 2122 - Karma: 98
Slightly altered using FCP's 3-way color corrector. Also, I recently updated to the newest GoPro firmware: http://www.goprocamera.com/support/hdheroupdate.php
Dec 30 2010 2:34AM
0 0
profile picture
huck_to_flat
Posts: 167 - Karma: 15
The bike handlebar mount works on a pole and ur battery will run out way before ur memory card will
Dec 31 2010 5:30PM
0 0
profile picture
IHeartWeasels
Posts: 239 - Karma: 55
I homemade a gopro mount. did this by...

Cutting a library card (who needs the library anyway) in half lengthwise to make it super skinny. then, i used a flatmount onto the card. Finally, superglue to card lengthwise to the end of a trekking or ski pole. And remember, ductape is your friend, as it provides all your structural integrity. You just gotta get silly with it... and voila, you now either have a snowboard pole cam or a follow-cam pole mount..

hope i helped
Jan 1 2011 1:22AM
0 0
profile picture
gnarles.
Posts: 2587 - Karma: 130
yo got a quick question how do you guys no you got the perfect angle on the helmet where u can see where your skiing but also your skis powder wise
Jan 1 2011 1:40AM
0 0
profile picture
GreenHorn
Posts: 4896 - Karma: 1,209
film in 960. it gives you a lot more vision on the top and bottom. works great
Jan 1 2011 2:00AM
0 0
profile picture
teleTay
Posts: 2320 - Karma: 186
took me about 2 days of looking at my knees.

but just play with it because the angles can change depending on where the camera is mounted on your helmet
Jan 1 2011 10:46AM
0 0
profile picture
erikK
Posts: 3245 - Karma: 2,325
Yeah I've already had 3 adhesive mounts fall off.  Now I'm just going to super glue them or use the strap.
Jan 1 2011 7:29PM
0 0
profile picture
teleTay
Posts: 2320 - Karma: 186
i looking to get the chest mount because i am sick of all the mounts falling off.

btw did you let the glue cure, because i didnt on one of them and i seemed to rip of really easy..kinda fail on my part
Jan 1 2011 11:20PM
0 0
profile picture
erikK
Posts: 3245 - Karma: 2,325
Yeah the chest mount looks dope.  No not really I didn't know I was supposed to, fail.
Jan 1 2011 11:34PM
0 0
profile picture
teleTay
Posts: 2320 - Karma: 186
yeah you should let it site about 24 hours at room temperature
Jan 2 2011 12:48AM
0 0
profile picture
teleTay
Posts: 2320 - Karma: 186

December 30th "Canyons Pow" from tayalnes on Vimeo.



this was shot in the WVGA mode (60fps) because i had a small memory card in that day,
Jan 2 2011 11:29AM
0 0
profile picture
T.DUDE
Posts: 1681 - Karma: 129
damn that loook soo nice..!
i was surprised by the quality of wvga.pretty good.

two questions:
What the fuck is the kid in the yellow and black wearing for pants?,,, tights?
what song was that? I enjoyed it
Jan 2 2011 12:45PM
0 0
profile picture
Otter.
Posts: 1161 - Karma: 84
don't put the helmet mount on top... then you cant really see you in it. If you mount it on the front you can still get the angle like you would on top but you can also have it look down at you or get your skis in the picture.

but you gotta have the helmet mount piece.
Jan 2 2011 1:22PM
0 0
profile picture
LIL-WAT
Posts: 1510 - Karma: 146
switch 9 was dope dope.

I just gor mine to but in the middle of summer so can only film kiteboarding, cant wait to take it on the slopes.

My test..



I only have a 2gb card so had 20mins to film, getting my 8gb one soon.
Jan 2 2011 7:05PM
0 0
profile picture
teleTay
Posts: 2320 - Karma: 186
thanks, and yeah the wvga did turn out pretty good, i didnt even mess around with any color correction

but he is just wearing some tight sessions pants


song was All Along - Kid Cudi
Jan 2 2011 7:26PM
0 0
profile picture
T.DUDE
Posts: 1681 - Karma: 129
thanks my friend.
Jan 2 2011 7:46PM
0 0
profile picture
[J_Gasper]
Posts: 2983 - Karma: 1,594
yeah but its day in night, he pays 100 for his card i pay 15 bucks. mine as well bring a laptop
Jan 2 2011 8:51PM
0 0
profile picture
[J_Gasper]
Posts: 2983 - Karma: 1,594
exactly.
Jan 2 2011 8:52PM
0 0
All times are Eastern (-4)