HELP ME PLEASE!!!!

that's a shop mistake, take them back to the shop and politely ask what they can do fix the problem. They will need to be re-drilled if they are actually off (not saying they're not, but sometimes its a like optical illusion that they're off, I've made the mistake a few times and then measure it to be sure), it's not necessarily a "new ski" situation, but just see what they can do. Don't demand, or honestly even ask for a new ski, just see what they can do for you cause if it's clearly mounted wrong it's their fault (it's not even like they mounted in a spot other than you asked for, there's only really one spot to mount that ski, haha). Good luck.

yeah i hear you so they will just fill the holes and i mesured it and its about 5 cm lower then the other one so im just worried if the bindings rip out... should i ask them about that?

Yea I wouldn't go asking for a new set of skis right away either, mistakes happen and the construction of you skis will not be affecting from a single redrilling. Most skis are good to 3 mounting and because they are a park ski most will only ever reach a max of a single remount due to the lifespan of a normal park ski. Like flashkick said sometimes it can appear to be off on the mount but this may not be the case, you are used to looking at two skis that either have the same grafics or grafics that line up with the other ski. Therefore when you get outside of this norm then it can appear that they were mounted off when infact they were mounted correctly. No matter what just bring this to the attention of the shop in a calm manner and quite often you will be able to come to a mutual understanding that will be beneficial for both parties.

okay thanks to both

Yea you won't have to worry at all about the bindings ripping out with just the single remount. Its when you get above the 3+ mounts that you have to start worrying about the structural issues. good luck to you and let us know how it turns out with the shop

plus, the shop will respect that you are an understanding customer and will help you out in the future. i am sure the manager will allow you to get a couple free tune ups or such.

at least that is what i would do at my shop. but im no manager haha.

yeah for sure and will do

yeah i hope i get something to say were sorry we messed up or atleast what i payed to have them mounted

Yea dont ask for new ski, im sure they will give you some new. When i get my kung fujas mounted they drilled them to much, to screw was pushing on my base. So i go to the shop and the dude was very nice, he asked me if i want another pair of fujas or something new. So they gave my new ski and i dont even ask them.

yeah im going to go in tomorrow and just tell them whats up but thats sick that you got a new pair

so i just came back from the shop and fought with the guy there for about 20 min.... he tells me that they are both the same level even though one is 1/4 inch lower and that they are infact not mounted backwards.... i told him to learn to use google and then he asked what it was.... i wish i lived somewhere that had good shops... not ones full of idiots...

Bring your own tape measure to the shop and ask to speak to a different employee. Measure it out for them and write down the dimensions so that you can show they are in fact different lengths and they are retarded.

i got one from them and showed them and they said it wasent enough to do anything about... fucking idiots... this makes me want to open my own shop... too bad im only 15 hah