Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Bindings

profile picture
Animal.Party
Posts: 311 - Karma: 158
Im looking to take bindings off one pair of skis and put them on another. Do I need any special tools or just a screw driver or drill. Or should i just take them to the shop?
Oct 13 2010 11:16AM
0 0
profile picture
smile=]
Posts: 1858 - Karma: 86
tkae them to a shop
you might ruin them or your skis
Oct 13 2010 11:21AM
0 0
profile picture
byrne
Posts: 367 - Karma: 91
not a good idea to do that if you have to ask that question. hit up the shop
Oct 13 2010 11:26AM
0 0
profile picture
N.L.
Posts: 2420 - Karma: 2,744

sometimes going to a shop isnt an option, and if you dont have a personal tech at a specific shop, you could be trusting a drunkard to mount you up.

you need a special phillips head screwdriver called #3. its teeth are bigger than a regular phillips head, so if you dont use the big one you could strip your screws. after you take the bindings off, clean them and inspect them. GLUE! you have to put wood glue in the holes of the skis you want to remount them on, mount the bindings taking care of not overtightening the screws and stripping the wood in the skis. let them dry overnight, and you're good to go.

Oct 13 2010 11:44AM
0 0
profile picture
concept311
Posts: 1936 - Karma: 73
if you don't have the right screw drive or Bit for a drill. you will strip the screws
Oct 13 2010 11:46AM
0 0
profile picture
Animal.Party
Posts: 311 - Karma: 158
yea these skis are just going to be for jibbin around on nothing to serious. Why do I put wood glue in the holes of the skis I'm mounting the bindings to? Like im going to be putting screws in the hole filled with wood glue? Thanks
Oct 13 2010 2:00PM
0 0
All times are Eastern (-4)