Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

LOOK PIVOT 12 QUESTION

profile picture
Coxworth
Posts: 1377 - Karma: 2,845

i have a pair of 2011 look pivots and i think im buying surface next lifes 160 and the have a 100mm waist underfoot whatever. where or who could i buy bigger breaks off of?

[IMG]alpinesportinggoods.com/prodimg/PIVOT1411.GIF[/IMG] 

those are the bindings that i have\

[IMG]surfaceskis.com/gear/hardgoods/SURFACE_NEXTLIFE.png[/IMG]

those are the skis im probably buying if i get larger breaks

Sep 6 2010 3:18PM
0 0
profile picture
Utard
Posts: 2132 - Karma: 296
bend
Sep 6 2010 3:19PM
0 0
profile picture
zerospinskier
Posts: 4867 - Karma: 350
Turntable breaks are hard to come by. Every single one of my pairs has at least 1 arm broken off. Your best bet is going to be bending the ones on it. It's not that difficult and there are a lot of tutorials of how to take them apart on here and TGR.
Sep 6 2010 3:21PM
0 0
profile picture
Coxworth
Posts: 1377 - Karma: 2,845
could you send me a link? thanks for the help too but i dont have the best of luck on the searchbar
Sep 6 2010 3:24PM
0 0
profile picture
arandomname
Posts: 1989 - Karma: 18
https://newschoolers.com/ns/forums/readthread/thread_id/455931/

no_steeze gives a tutorial on taking it apart and bending the FKS/Pivot brakes in the OP.

Sep 6 2010 3:30PM
0 0
profile picture
16bit
Posts: 156 - Karma: 4
2011 pivot 12? have I missed something?
Sep 6 2010 3:39PM
0 0
profile picture
arandomname
Posts: 1989 - Karma: 18
He meant 14 I think.
Sep 6 2010 3:42PM
0 0
profile picture
Utard
Posts: 2132 - Karma: 296
wow really? nobody is this stupid
Sep 6 2010 3:42PM
0 0
profile picture
MEGAZORD
Posts: 4531 - Karma: -7
The new fks has a removeable brake, hit up a rossi dealer and order one. How is this in any way difficult.
Sep 6 2010 3:51PM
0 0
profile picture
Coxworth
Posts: 1377 - Karma: 2,845
i meant 14
Sep 7 2010 1:41AM
0 0
profile picture
Kangbang
Posts: 14211 - Karma: 423
or pm him asking if he can bend your brakes for you. then just ship them out to him
Sep 7 2010 1:52AM
0 0
profile picture
Mr_pretzel
Posts: 4616 - Karma: 1,289
Your shop could probably do it.
Sep 7 2010 3:33AM
0 0
profile picture
DHogg
Posts: 3462 - Karma: 234
Good tutorial with pictures and lots of discussion:

http://www.tetongravity.com/forums/showthread.php?t=24647

It's much easier than it looks. Just bend SLOW
Sep 7 2010 3:44AM
0 0
All times are Eastern (-4)