Red Bull Unrailistic | LIVE Broadcast

Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Ski making ???

profile picture
theblacktaco
Posts: 1462 - Karma: 82
to anyone who has made skis or any experince with the building of skis i wanted to make skis for my senior project

so i was wondering some things

1) should i (17 years old) even think about making my own skis with hardly any wood working skills ... sure i can build nasty backyard rails but this shit seems hard

2) if you think it is possible how much do you think building my own press and getting all the material will cost

3) so even if i do make a press with all the materiel how many tries will it take till i get a ski i can actually ride

thanks ns and if u wanna add anything it would be appreciated
Jun 15 2010 8:48PM
0 0
profile picture
joshua
Posts: 5046 - Karma: 1,280
http://skibuilders.com/

This site should help you a lot.
Jun 15 2010 8:49PM
0 0
profile picture
theblacktaco
Posts: 1462 - Karma: 82
ok sweet thanx man
Jun 15 2010 8:54PM
0 0
profile picture
Otter.
Posts: 1161 - Karma: 84
have fun!
Jun 15 2010 8:55PM
0 0
profile picture
buchanan.
Posts: 1911 - Karma: 156
i thought about making skis in my last year of carpentry and jointery in highschool. but you need a lot of shit man. its an expensive undertaking.
Jun 15 2010 8:58PM
0 0
profile picture
Tripplesixty
Posts: 835 - Karma: 148
Expensive is the main thing, and you probably cant expect much out of your first few pairs anyways. Basically you need raw materials for the skis which starts around $50 and only goes up. After that you need tools for cutting the wood, tapering it, bending and shaping the edges, fiber glass if your going with a wood core, and then laminating it in your press and of course working with the poly base... So yes its doable with enough money, time and patients... I would say make a sumer setup for your senior project
Jun 15 2010 11:22PM
0 0
profile picture
KyleA
Posts: 865 - Karma: 510
On a senior project level it wouldn't be terribly difficult.  If you have some tools (jigsaw, router, drill, belt sander, table saw, air compressor, a planar is helpful) you can do it for relatively cheap.  You can construct a pneumatic press out of wood or try to find some free steel.  If you are still in high school you should have access to some sort of CNC machine to make templates.  Materials for a pair of skis will be at least $150 if you just use a wood sidewall.  As someone has already said, read up on skibuilders.com before you try anything. 
Jun 16 2010 1:51AM
0 0
profile picture
DHogg
Posts: 3462 - Karma: 235
Here is a thread which might be useful for you:

http://www.tetongravity.com/forums/showthread.php?t=136144

It's about how ON3P started and includes lots of info, photos, and issues they had.

Making skis is expensive. Very expensive to start with. Take what you expect it to cost you and double it,at least.
Jun 16 2010 2:06AM
0 0
profile picture
mr.green
Posts: 590 - Karma: 50
hmmmmmmmm
Jun 16 2010 2:55AM
0 0
profile picture
Elmo.
Posts: 4317 - Karma: 663
seems so hard... props on going for it!! have fun with it man!
Jun 16 2010 1:51PM
0 0
profile picture
RMU
Posts: 120 - Karma: 2,912
Not an easy feat,

hit us up if you want any more help.

Rmuskis@gmail.com

Jun 16 2010 2:18PM
0 0
profile picture
theblacktaco
Posts: 1462 - Karma: 82
ok thanx everyone .. ive decided to make a mini press first so i dont loose any money and i will get a feel for what a full size one will be kinda like
Jun 16 2010 5:18PM
0 0
All times are Eastern (-4)