Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

GoPro cable cam

profile picture
Sklar
Posts: 8863 - Karma: 31,577
I wrote up a big thing about it, but it got deleted, so the short version


I've been playing around with the idea of a cable cam for my go pro
i had my friend weld up a frame, and strung up some cable

Click for larger image

Click for larger image

I didn't think i needed a tensioning system, but i think that might have led to some of the bouncyness seen in the video.
I think in the future i will try and use my slackline to tighten the cable

I am going on a big weeklong kayak trip tomorrow where i will get this setup dialed in i hope, but i'm pretty happy with this, being my very first test
I'll post up more when i get home


I'll put the test video up when vimeo finishes converting it
Jun 13 2010 8:59PM
0 0
profile picture
MANDER
Posts: 4017 - Karma: 2,038
Sick Idea. Exited to see the video.
Jun 13 2010 9:44PM
0 0
profile picture
MadSteezin
Posts: 4572 - Karma: 936
Add some weight to the bottom of it to balance it out and remove the bounciness.
Jun 13 2010 9:46PM
0 0
profile picture
Sklar
Posts: 8863 - Karma: 31,577
yea thats what i was thinking, too
video is almost done
Jun 13 2010 9:47PM
0 0
profile picture
Sklar
Posts: 8863 - Karma: 31,577
here is the video, these were the very first tries, and i didn't get to do more, or tweak it because it started raining really hard

Untitled from Matt Sklar on Vimeo.

Jun 13 2010 9:49PM
0 0
profile picture
IanAvery-Leaf
Posts: 9926 - Karma: 9,344
looks really sick
like the guy said above me add some weights to make it smoother
Jun 13 2010 9:51PM
0 0
profile picture
1337
Posts: 31038 - Karma: 29,003
definitely wanna have it facing sideways and not down the cable. Ad some weights and get a ratchet to tighten the cable and you will be all set. I've seen people hook up a fishing line and reel to the frame so they can reel it back to them and reset it, if you ever consider that.
Jun 13 2010 10:35PM
0 0
profile picture
Sklar
Posts: 8863 - Karma: 31,577
yea, i just kind of threw it up, but you are right
I'm going to add weight and tension it when i set it up for kayaking
i'm also working on a fishing line or something similar
Jun 13 2010 10:40PM
0 0
profile picture
p.hawks
Posts: 2832 - Karma: 581
sick idea in the iPod so threads for later
Jun 13 2010 11:08PM
0 0
profile picture
dunkaroos
Posts: 2574 - Karma: 633
thats so sick. can't wait to see the finished product
Jun 13 2010 11:32PM
0 0
profile picture
ike.
Posts: 2292 - Karma: 93
so dope dood, for first test that was sick!! imagine what a little tweaking would do.
Jun 14 2010 12:06AM
0 0
profile picture
Alkyy
Posts: 2839 - Karma: 149
throwin weights on doesnt help as much as you would think.  If you just through a bunch on the bottom it makes it swing like a pendulm if you arnt perfectly steady at the start.  id get a tie down strap for a truck (the ones that rachet) so you can really pull it tight that will help a ton.  We used the fishing line on ours, makes it so once you get good you can control speed and bring it back to you really easy (if your using it for kyacking this will probably be key)  It looks good though some minor adjustments here and there and it should be perfect
Jun 14 2010 10:01AM
0 0
profile picture
CS_Films
Posts: 468 - Karma: 466
Skip Forward to 2:03 is our cable cam design. Defiantly get the cable as tight as possible and it takes out allot of bounce. Make sure when you release the camera its not rocking back and forth. We use a Bait Cast Fishing reel to control speed and retract the camera. You must use a bait cast in order to control the speed.

Link to a photo of a bait cast.

Jun 14 2010 11:34AM
0 0
profile picture
Algebra
Posts: 5215 - Karma: 1,677
wieght is key to a good cable cam
Jun 14 2010 7:39PM
0 0
profile picture
.cam.
Posts: 1852 - Karma: 48
how did you make your 12 foot jib?
Jun 14 2010 10:48PM
0 0
profile picture
eheath
Posts: 61100 - Karma: 118,254
Yeah, needs to be like 10 lbs heavier.
Jun 14 2010 10:50PM
0 0
profile picture
ike.
Posts: 2292 - Karma: 93
legit.
Jun 14 2010 11:03PM
0 0
profile picture
CS_Films
Posts: 468 - Karma: 466
After Alex, Galin and I get ahead on editing the movie i plan to make a short video explaining all of my homemade rigs how i built them whats good and bad about the designs.
Jun 15 2010 6:20AM
0 0
profile picture
BOONE_SKIS
Posts: 197 - Karma: 1,331
Good idea - keep working on it and you'll get it dialed in!
Jun 15 2010 10:34AM
0 0
profile picture
.cam.
Posts: 1852 - Karma: 48
ok thank you. thats a good idea
Jun 15 2010 2:29PM
0 0
profile picture
Sklar
Posts: 8863 - Karma: 31,577
here is the edit i made from my trip it has one shot with the cable cam moving, and a few i put the cable across the river and put the camera in the middle

Waterfall edit from Matt Sklar on Vimeo.



with the moving one, i am pretty happy with the results, i didn't get the speed completely dialed because hitting that waterfall was kind of a last minute deal so we didn't have much time
and i wish i got to set it up in some different spots on the river where i took the static cable shots, but it was really hard to get up/down going across the river, so it stayed there
Jun 28 2010 2:16PM
0 0
profile picture
canterbury
Posts: 2382 - Karma: 55
looks cool, still not quite as smooth as it should be, and cut your shots earlier so you don't see the camera shake and bounce around when it gets to the end of the line.
Jun 28 2010 3:02PM
0 0
profile picture
Chubz.
Posts: 13918 - Karma: 25,656
OMFG that is soooo dope dude you can make a total ski movie with a GOPRO!!!!!!!!!!
Jun 28 2010 6:17PM
0 0
profile picture
scoobydoo
Posts: 1 - Karma: 10
sweet set up.  any video yet on how you made the rigs?  who's the artist in the video?

thanks
Mar 30 2011 1:11AM
0 0
All times are Eastern (-4)