Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Do i need to adjust my bindings new boots

profile picture
rcflier500
Posts: 44 - Karma: 10
hi all,
i just bought a new pair of boots and the sole length on the new pair is 328 as opposed to 330 for the old pair. will i need to have my bindings readjusted for 2mm?
Mar 8 2010 9:51PM
0 0
profile picture
BWalmer
Posts: 9141 - Karma: 12,883
yes, otherwise they will pre-release a lot on you.
Mar 8 2010 9:59PM
0 0
profile picture
rcflier500
Posts: 44 - Karma: 10
i put the new boots in and the forward pressure indicator on my rossi bindings is in the center where it should be. shouldnt it be fine then?
Mar 8 2010 10:40PM
0 0
profile picture
rcflier500
Posts: 44 - Karma: 10
bumpitude
Mar 8 2010 10:57PM
0 0
profile picture
BWalmer
Posts: 9141 - Karma: 12,883
put your boot on, clip in, and twist your foot, if it wiggles it will end up pre-releasing and you need to adjust the forward pressure, if not then you should be ok. But, if it does pre-release on you, that's what needs to be fixed.
Mar 8 2010 11:40PM
0 0
profile picture
Luc.
Posts: 7540 - Karma: 59
2mm SHOULD be negligible.

that being said, it may not be, so the best advice is take it to the shop where u got the boots and get them to check it, they should do it for free.
Mar 9 2010 1:41PM
0 0
profile picture
Luc.
Posts: 7540 - Karma: 59
one more thing, your din should not change because of the 2mm difference, but ur forward pressure might be slightly different, which is an easy adjustment.
Mar 9 2010 1:41PM
0 0
profile picture
rcflier500
Posts: 44 - Karma: 10
ya, what i did was to put my new boot in. and on the side of the rossi bindings there is a forward pressure indicator and it is in the right place.
Mar 9 2010 4:50PM
0 0
All times are Eastern (-4)