Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Best way to put stickers on helmet

profile picture
Moonshine
Posts: 903 - Karma: 398
Mine always bubble and stuff. they never get on smooth, especially the big ones. any suggestions?
Dec 17 2009 8:27PM
5 1
profile picture
Freeheel4real
Posts: 909 - Karma: 95
try harder
Dec 17 2009 8:29PM
0 0
profile picture
cct_222
Posts: 1526 - Karma: 141

start on one side and SLOWLY make your way to the other,  use a credit card or something like that to help apply it

Dec 17 2009 8:31PM
0 0
profile picture
PaleCelery
Posts: 7228 - Karma: 608
poke the bubble with a razor blade to let the trapped air out
Dec 17 2009 8:33PM
0 0
profile picture
Squid.
Posts: 1904 - Karma: 23
Big stickers don't work on helmets dude. when you try to cover a curved surface with something flat, you'll get bubbles
Dec 17 2009 8:34PM
0 0
profile picture
GreenStezz
Posts: 3570 - Karma: 720
DieCuts........................
Dec 17 2009 8:39PM
1 0
profile picture
JRubes
Posts: 48 - Karma: 14
not if your a total pro at it, waste 5 hours of your life, and ..stuff
Dec 17 2009 8:40PM
1 0
profile picture
eljusto.
Posts: 2163 - Karma: 457
enough said.
Dec 17 2009 8:46PM
0 0
profile picture
iliketoski329
Posts: 220 - Karma: 34
haha agreed.but i mean if you wanna be picky about it heating it up with a hairdryer while u apply it works sometimes...just make sure not to overheat and stretch out the stickers
Dec 17 2009 8:46PM
0 0
profile picture
Gooseling
Posts: 1028 - Karma: 10
ok i know this thrad died a week ago.
but bubbling and crinkles can still happen with bigger diecuts. any solution to this?
Dec 25 2009 5:47PM
0 0
profile picture
mackcamp
Posts: 1207 - Karma: 263
Put a lighter flame to the bubble very quickly. Then press out the air.
Dec 25 2009 5:49PM
0 0
profile picture
dantron88
Posts: 55 - Karma: 10
i suffered from this on my old helmet and i dont want to screw up my new one with shitty sticker jobs please help
Dec 25 2009 5:50PM
0 0
profile picture
Gooseling
Posts: 1028 - Karma: 10
ive heard hairdryer to. does this work
Dec 25 2009 5:51PM
0 0
profile picture
hyphyhippo
Posts: 55 - Karma: 86
haha. there you have it
Dec 25 2009 5:55PM
0 0
profile picture
Steeze-On-Toast
Posts: 679 - Karma: 92
This, and then any small bubbles after, break with a pin or blade and smooth over.
Dec 25 2009 5:56PM
0 0
profile picture
Gooseling
Posts: 1028 - Karma: 10
thanks for the help to all
Dec 25 2009 5:58PM
0 0
profile picture
Shredability
Posts: 2756 - Karma: 501
Acrylic medium, paint it over top
Dec 25 2009 6:15PM
0 0
profile picture
ONE-UP
Posts: 609 - Karma: 53
yea ive had problems with this too
Dec 25 2009 6:18PM
0 0
profile picture
Gooseling
Posts: 1028 - Karma: 10
is that honestly necessary?
Dec 25 2009 6:20PM
0 0
profile picture
SEABURN
Posts: 4859 - Karma: 2,751
to keep them there take a lighter to the sticker to melt it to your helmet. also fixes bubbles.
Dec 25 2009 6:41PM
0 0
profile picture
*Johnny
Posts: 403 - Karma: 19

I've a hint for bigger die-cut.. it work for me so all you need is to cut your sticker in 3 or 4 pieces or at each letter and apply them one by one and do a nice job, after that, I take a hairdryer and dry the sticker just a little bit ! so they stuck on my helmet and it's done ! and the key is : take your time.

I hope this will be helpfull sir

Dec 25 2009 8:01PM
0 0
profile picture
flexpattern
Posts: 1090 - Karma: 45
start slowly from one corner and slide your thumb over the sticker so you have as small/thin folds on the surface as possible, don't apply any pressure to this area at the moment...

then take a sharp penknife or stanely knife, and very very very very very gently cut and fine sliver out of the sticker along the fold of the sticker, so that the sticker is flush with the curve of the helmet, harder to explain than to do mind...

then apply pressure to the sticker, so the folds are now flat and flush, pop any bubble with a pin/needle/razor blade

works best if you can manage to get the crinkles/folds over areas of block colour, and not writing/patterns or else you will have to try and match letters up and shit.... try and arrange your crinkles correctly!


but obviously be careful with sharp shit around your lids because if you score a line in the hard shell your helmet could crack along that line in a bad crash, not goooooooooood!.
Dec 25 2009 8:05PM
0 0
profile picture
Shredability
Posts: 2756 - Karma: 501
It will last forever
Dec 25 2009 10:45PM
0 0
profile picture
poh_money
Posts: 609 - Karma: 66
just cut the big sticker into smaller ones then assemble
Dec 26 2009 8:10PM
1 0
profile picture
TheDude
Posts: 2058 - Karma: 117

dont put stickers on.

or just trace your stickerswith sharpie and color it in

Dec 26 2009 8:15PM
0 0
profile picture
Hogis
Posts: 551 - Karma: 393
Just take a scissor and cut it up as your putting it on, no one will notice or care for that reason if they notice.
Dec 26 2009 8:57PM
0 0
profile picture
Dr.Brown
Posts: 588 - Karma: 21
he said it all.
Dec 26 2009 10:34PM
0 0
profile picture
inactive
Posts: 4772 - Karma: 97
is putting giant stickers on your helmet necessary?
lighters and sewing needles are your friend
Dec 26 2009 10:51PM
0 0
profile picture
ride-rider
Posts: 1761 - Karma: 20
true that,  to try and cheat you could actually try and use like a butane flame thrower lighter to take the stresses out so it lays flat.  Obviously just be really light on the flame.
Dec 27 2009 12:18AM
0 0
profile picture
Lemuel
Posts: 14477 - Karma: 10,515
When I stickered up my helmet, I cut the stickers as I put them on the the pieces lined up.  Seems like alot of other people do the same thing.   It takes some time, but you get one sick sticker job in the end.  I get so many compliments on my helmet.  I spent like an hour laying it out and applying/ reapplying.  Good luck.
Dec 27 2009 9:25AM
0 0
profile picture
smilingchris
Posts: 317 - Karma: 72
^ defo !   i have used an iron but only on a low setting and i just go over the sticker quickly and it helps it stick more and gets rid of the bubbles!
Dec 27 2009 10:20AM
0 0
profile picture
SwiftSilentSquaw
Posts: 427 - Karma: 40
When you put the diecuts on you should kind of pull them and stretch them (not actually stretch, but pull tight) and spread them with a credit card. They are pretty moldable, but you have to use vinyl diecuts.
Dec 27 2009 1:24PM
0 0
profile picture
jakobk
Posts: 308 - Karma: 11
threads! really helpful
Jan 6 2011 6:41PM
0 0
profile picture
A.Eberhard
Posts: 4426 - Karma: 415
Only way to go on a helmet.
Jan 6 2011 6:41PM
0 0
profile picture
Deluge
Posts: 4398 - Karma: 767
also, use windex or something on the surface before you apply the sticker so that it is clean and you dont have any dirt or smudges under it
Jan 6 2011 6:45PM
0 0
profile picture
egg.
Posts: 3231 - Karma: 3,477
.
Jan 6 2011 6:47PM
0 0
profile picture
Elmo.
Posts: 4317 - Karma: 663
use the razor to pop bubbles but i use smaller ones and diecuts go on so easy
Jan 6 2011 7:21PM
0 0
profile picture
-Dan
Posts: 7086 - Karma: 50,480
It's true, this guy has the nicest sticker job I've seen.
Jan 6 2011 7:24PM
1 0
profile picture
crab_pretzel
Posts: 3919 - Karma: 622
die cuts are really the only solution. otherwise, stick the very edge of it to your finger, and put the other end of the sticker on your helmet first and then smooth it down towards the other end where your finger is. this will prevent a part beyond where you are smoothing it from sticking before you want it too, which will obviously cause bubbles
Jan 6 2011 8:10PM
0 0
profile picture
jakobk
Posts: 308 - Karma: 11
i cant get my saga die cut onto my helmet nicely... its just because they are fairly big right?
Jan 6 2011 10:41PM
0 0
profile picture
Skithedeep
Posts: 645 - Karma: 39
i always tape the sticker on the top to wherever i want to stick it, flip up with back facing up, remove paper from sticker, and slowly apple with a credit card from the part closest to the tape down, then remove tape and its on perfectly
Jan 7 2011 12:54AM
0 0
profile picture
Njens.
Posts: 1688 - Karma: 46
You're doing it wrong
Jan 7 2011 12:57AM
0 0
profile picture
cooper.fry
Posts: 2229 - Karma: 34
Sounds like this would work, good advice.
Jan 7 2011 1:03AM
0 0
All times are Eastern (-4)