Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Waxing Before First Use

profile picture
ReetsAdeets
Posts: 1531 - Karma: 611

So i have new Elizabeths and i was just wondering if its good to wax them before their first use. I searchbarred, couldnt find anything.

Sep 2 2009 8:16PM
0 0
profile picture
Loges
Posts: 1928 - Karma: 21
i just got my anthems in the mail, and it looks like they came pre-waxed from the factory.
Sep 2 2009 8:20PM
0 0
profile picture
El_Barto.
Posts: 11630 - Karma: 24,463
i think factory wax is shit. i wax mine when i get knew mostly just for fun cuz i like waxin skis but i think most people will tell you to put your own wax on
Sep 2 2009 8:22PM
0 0
profile picture
.SimonB.
Posts: 1959 - Karma: 713
My invaders dont hold wax worth shit, but they came factory waxed, so i rode them once or twice, then i waxed. if i dont wax them like every 3-4 times they stick so bad. if you go ahead and wax them, then i would try to take some of the factory wax of first, but make sure you dont harm the base. you might just want to put the iron to the ski and see what is on there. that might be a bad idea, i dont know.
Sep 2 2009 8:58PM
0 0
profile picture
Balto
Posts: 25985 - Karma: 4,398
please post in the sticky
Sep 2 2009 9:10PM
0 0
profile picture
BMskier
Posts: 3363 - Karma: 365
do a hot wax when you first get your skis to get all the cruddy factory shit outta there and then after that you start builing your wax base back up. after the 1 hot wax do atleast 2 regular waxes. i try and do 4 when i get a brand new pair of skis, but thats just me. i have heard or people doing it up to 12 times. its all personal opinion.
Sep 2 2009 10:33PM
0 0
profile picture
[Dawn
Posts: 1718 - Karma: 69
this
Sep 2 2009 10:35PM
0 0
profile picture
ReetsAdeets
Posts: 1531 - Karma: 611
Aight thanx
Sep 2 2009 10:38PM
0 0
profile picture
ectreeskier11
Posts: 697 - Karma: 366
maybe it's because i used to race, but i always try to have a new pair of skis stoneground before i ski them. factory stonegrinds=bullshit (except for some of the indies), so have a tech do it then take em home, get your edges how you like them, throw 2-3 coats of wax going from softer to hard if you can and then scrape/brush. i know it's a bit of work but they'll ski better and hold up longer (getting a couple coats is actually super important, it will really protect from baseburn and you'll go superfast).
Sep 3 2009 2:53AM
0 0
profile picture
skifiend
Posts: 2063 - Karma: 13
factory wax is junk.  it's really there to keep your bases "moist" and protected.  I always wax a new pair of skis before I ride.
Sep 3 2009 8:16AM
0 0
profile picture
tom.skier
Posts: 817 - Karma: 392
they should have some factory wax on them when you bought them but a little extra never hurts.  will help the base last longer aswell
Sep 3 2009 8:41AM
0 0
All times are Eastern (-4)