Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

bending rails

profile picture
creighton
Posts: 3836 - Karma: 3,386
how would u bend a 20 ft rail to make a c rail wit? its either 2 or 2 1/2' pipe ,,,how would u do it with out putting kinks in it? bending it on a tree would make a kink.................
aint easy bein shleezy
Oct 30 2003 4:18PM
0 0
profile picture
vtrider
Posts: 1988 - Karma: 41
actually, if ya do it right, bending it around a tree you can do it with out kinking it, it just takes a very good eye.
_________________________________________________________

Salomon X Scream Freeride skis (187's) Brand new condition mounted once 150 obo

Salomon Xscream boots Size 29-29.5 75 obo.

PM me
Oct 30 2003 4:28PM
0 0
profile picture
wiglaf
Posts: 4877 - Karma: 141
my friend bent a rail and between a tree with his truck, its not a sharp kink but its pretty close
-erikolson
Oct 30 2003 4:39PM
0 0
profile picture
creighton
Posts: 3836 - Karma: 3,386
i want it 2 b nice and round, can you like heat it up and bend it easier?
aint easy bein shleezy
Oct 30 2003 4:41PM
0 0
profile picture
Vtsnowski
Posts: 3532 - Karma: 1,152
heat it then put weight down on it




Ski Fast and Stay Away From the Trees
Oct 30 2003 4:45PM
0 0
profile picture
creighton
Posts: 3836 - Karma: 3,386
just heat it with a torch?
aint easy bein shleezy
Oct 30 2003 5:42PM
0 0
profile picture
MaryJane
Posts: 193 - Karma: 10
you're gonna have to heat the whole thing , and keep it heated....I'm guessing it's not and easy do-it-yourself task. Granted I've never tried....but I can't imagin you're going to be able to create a smooth C without some pipe bending machines.
Donkification.
Oct 30 2003 6:02PM
0 0
profile picture
vtrider
Posts: 1988 - Karma: 41
pipe bending machines are really expensive. your looking at at least 10 g's to get a good pipe bender. just use the tree and winch trick. its works well. Look at the rail in seth morrisons part of ski movie 2, that rail came out smooth and was bent inbetween 2 trees.
_________________________________________________________

Salomon X Scream Freeride skis (187's) Brand new condition mounted once 150 obo

Salomon Xscream boots Size 29-29.5 75 obo.

PM me
Oct 30 2003 6:05PM
0 0
profile picture
Adamskinick
Posts: 3353 - Karma: 126
i say duct tape one end shut and blow dry the mother for like a little bit
-----------------------
Anybody need K2 Escape 2500, with look 9 nova bindings message me, also i will include good goggles, scott goggles
Oct 30 2003 6:06PM
0 0
profile picture
creighton
Posts: 3836 - Karma: 3,386
i heard 2 cap the end and fill it with hot sand then use a torch on the ends and itll make the whole thing soft? do you think that will work?
aint easy bein shleezy
Oct 30 2003 6:29PM
0 0
profile picture
crashidy
Posts: 33 - Karma: 17
your best bet is going to be go to your local hard ware store and pick up a blow torch, one of the yellow cannister benzene ones, they burn much hotter. get a couple friends find a nice big ol' tree and have one person constantly heating the pipe primarily in the area that you want it to bedn, and then just keep working it.

as for the sand idea that could be tricky, if you are going to do that you basically need the sand that they use for sand blasters...no figure out how to heat it..not worth it. just get a heating torch a coupleof trees and some friends and you are in business
Oct 30 2003 6:37PM
0 0
profile picture
sxeskier
Posts: 350 - Karma: 10
the real question is where is there a metal shop in western ny with a pipe bender




Poised to Destroy
......xRYCx......
Oct 30 2003 6:43PM
0 0
profile picture
CaderTots
Posts: 488 - Karma: 34
They get a pretty smooth bend on a rail in some moive, I dont remember which one but it is pretty good. Or I all else fails go to a construction site. They always have pipe benders there, plus when i worked with a construction company this summer they were all laid back and I bet they would do it for you.
-word-


Member 7101
Oct 30 2003 6:50PM
0 0
profile picture
Itsbackfliptime
Posts: 18901 - Karma: 75
just make a million tiny kinks. It would be like a dodecahedron rail or something like that.

Coming Soon...
Oct 30 2003 9:03PM
0 0
profile picture
DeVaultd56
Posts: 12 - Karma: 10
Whoever said that a pipe bender it way to expensice is wrong, you can get a pipe bender at home depot for about 60 bucks...worthwhile if u plan on making a few rails...also if you plan on heating a pipe until you can mold it you're gona need a pretty intense blow tourch, a REAL good pair of gloves, and a couple of friends to help
No poor bastard ever won a war by dying for his country, he won it by making the other poor bastard die for his -- George Patton
Oct 30 2003 9:16PM
0 0
profile picture
vtrider
Posts: 1988 - Karma: 41
really? the only ones i have ever seen are like 10 grand, i will look into that. Thanks.
_________________________________________________________

Salomon X Scream Freeride skis (187's) Brand new condition mounted once 150 obo

Salomon Xscream boots Size 29-29.5 75 obo.

PM me
Oct 30 2003 10:10PM
0 0
profile picture
PurpleSkier
Posts: 5634 - Karma: 311
METAL SHOP, use the pipe bender in there if they have one

_______________________________________________________
The Official-royal nose-picking, wannabea highschool dropout, Gary Coleman-loving, Arnold-hating, college chick-dating, Montana boonies guy

Member of the 'lets help Sam loose some weight so he can possibly get a girl' Club.

Only Westcoaster in the Eastcoast Cult
Oct 30 2003 10:17PM
0 0
profile picture
CaderTots
Posts: 488 - Karma: 34
The pipe benders that you buy at home depot are for really small pipes. You need a big hydrolic one to bend the guage pipe you need to build a rail.

-word-


Member 7101
Oct 30 2003 10:38PM
0 0
profile picture
MidwestJibba
Posts: 983 - Karma: 12
just go hit one at a mountain and make a regular kink one fo yo house
____________________

Skiing is way cool - me
Oct 30 2003 10:53PM
0 0
profile picture
DeVaultd56
Posts: 12 - Karma: 10
Well me and my friend started building some rails and the pipe bender we got bends up to 1 1/4 in pipe...so if ur makin a shotgun rail then that's no problem...i guess for a rainbow that might be a little thin then
No poor bastard ever won a war by dying for his country, he won it by making the other poor bastard die for his -- George Patton
Oct 30 2003 11:20PM
0 0
profile picture
joe_cool_ski
Posts: 796 - Karma: 9
take a torch and heat that bitch up and then us something like a tree or something to bend the hot metel that is how it is done
Oct 30 2003 11:24PM
0 0
profile picture
ninemillakilla
Posts: 65 - Karma: 10
its really simple, metal moves like butter if its hot, totally just heat it up and itll bend real easy you have to make sure its real hot tho-
Oct 31 2003 12:04AM
0 0
profile picture
creighton
Posts: 3836 - Karma: 3,386
we aready have a kink rail and a 30 ft single pipe rail
aint easy bein shleezy
Oct 31 2003 11:46AM
0 0
profile picture
hucksterjibber15
Posts: 4255 - Karma: 11
if its only 20 feet, you can end it around those big oil drums in the middle of feilds sometimes. we have a 50 foot c rail. we waited for the mexicans to go to bed, and then we yanked it from a farm. it was the top of like a big greenhouse from a nursery
--------------------

i hate posers. thanx to harvey and all who contribute to the site for makin it so kick ass.

if people dont like what ive created, fuck em, because somebody else does-TANNER

can you see what's down there? me either.-seth peering down a cliff before he drops it
Oct 31 2003 12:29PM
0 0
All times are Eastern (-4)