Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Need help with rail problem. ASAP

profile picture
csfetter
Posts: 616 - Karma: 12

ight hers the deall, my buddy has a sik like 12 foot square metal rail, we dont get much snow in ontario canda so when it comes down its only here for a bit, this is why i need help quickly, k so the problem is the rail is rusted. simply enough right, so whuts the fastest n most effiecient way to fix this? i heard grinding the rail and painting it is the best way but other then that i need hellp gettin this thing going so we can jib a bit... any advice at all is helpfull thanks... for instance waxing? does it work whut kidn of wax, etc

Feb 7 2008 3:21PM
0 0
profile picture
three6steeze
Posts: 484 - Karma: -3
grind that sucker down, and a think coat of paint helps

wax isisnt REQUIRED but it will help

just use pretty much and rub on you can find
Feb 7 2008 3:25PM
0 0
profile picture
SkierX
Posts: 16253 - Karma: 538
Belt-sander, and strip the rail of rust, and enjoy.

If no access to a belt-sander, bust out the elbow grease and sandpaper.
Feb 7 2008 3:28PM
0 0
profile picture
csfetter
Posts: 616 - Karma: 12
fuck im feelin that sand paper idea might take a while but should spray paint on top of that? or no? just like it sandid down
Feb 7 2008 3:34PM
0 0
profile picture
SkierX
Posts: 16253 - Karma: 538
After it's sanded you can paint it, but it's not needed. It will help keep it from rusting in the future as I'm guessing it's not stainless.
Feb 7 2008 3:53PM
0 0
profile picture
Ifeinforsnow
Posts: 1394 - Karma: 37
just take an old ski and run it along the rail for awhile like you were grinding it. do it for like 20 minutes and you should be good to go
Feb 7 2008 4:07PM
0 0
profile picture
CrazedSkier1080
Posts: 3357 - Karma: 66
probably the best idea, and easiest. if you have a large file, that will help too, just make sure after you file you slide a ski on it a bunch of times too
Feb 7 2008 4:29PM
0 0
profile picture
Lineskiah11
Posts: 2029 - Karma: 21
yeah thats what i did once my rail got rusty... i just took a lerge metal file and got some of the rust off with that then i just used an old ski and waxed it after. its perfect now. paint is def a good idea if you going to hit it again once u get more snow after this.
Feb 7 2008 4:36PM
0 0
profile picture
csfetter
Posts: 616 - Karma: 12
sikkk deall thanks for the tips guys, when u run ur skiis on it after that the one dude ^^ said wax it with wut? whut kinda waxx, that was a main question i had?
Feb 7 2008 4:57PM
0 0
profile picture
Ceru
Posts: 1879 - Karma: 101
this could be a big noob statement but

painting the rail would help it slide?  i always thought that it would make it sticker and harder to hit..
Feb 7 2008 5:01PM
0 0
profile picture
Scolson
Posts: 2904 - Karma: 92
LIke everyone said, sand it down to slippery smooth bare metal.   But don't paint it, it'll just scrape of anyway.  Shoot it with some WD-40 and keep a layer of that on there to keep it from rusting instead.
Feb 7 2008 5:04PM
0 0
profile picture
TheQuailman
Posts: 7381 - Karma: 144
WD-400 stuff. - maybe sand if possible or take a metal razor scooter to it (thats what I do with my skate rail)

Do not paint!
Feb 7 2008 5:06PM
0 0
profile picture
tBatt
Posts: 9632 - Karma: 580
check around you or your buddies garage for a drill and one of these... its like filing it down but it goes on the end of a drill and its muchhh faster/more effective  

Feb 7 2008 6:52PM
0 0
profile picture
B.Snow
Posts: 1859 - Karma: 92
Yeh I think you would be ok if you waxed only... especially if you did a good job
Feb 7 2008 7:03PM
0 0
profile picture
Mac_Grey
Posts: 1255 - Karma: 36
might have been posted but too lazy to read... paint will keep it from rusting again
Feb 7 2008 7:12PM
0 0
profile picture
Mr.O
Posts: 1582 - Karma: 23
yeah sand that down and then lay down a good layer of rustolium paint, stuff works amazing; then wax it a lot like people said
Feb 8 2008 2:27PM
0 0
profile picture
nigel12
Posts: 571 - Karma: 11
or you could just hit it
it'll be sticky but after a couple hits should be fine
if its still sticky slowly add some regular candle wax
but only a little bit at once because it will get pretty slick fast
Feb 8 2008 2:36PM
0 0
profile picture
Mr.O
Posts: 1582 - Karma: 23
i dont think they want to hit it right away because the rust will get on the skis and what not they want to avoid the rust
Feb 8 2008 2:45PM
0 0
profile picture
nigel12
Posts: 571 - Karma: 11
if you leave the edges of your skis wet after skiing they rust and it comes off within the first couple runs i dont think its a biggie but if you got like a wire brush or a wire sanding disk on the end of a drill that would work too
Feb 8 2008 2:48PM
0 0
profile picture
Scolson
Posts: 2904 - Karma: 92
why are you even on ns then.  it was less than half a page of responses.
Feb 8 2008 4:28PM
0 0
profile picture
csfetter
Posts: 616 - Karma: 12
im thinkin the sand it down idea no paint cuz peeps r sayin no paint n im lazyy n shit dont wanna wait for it to dry so i might run an old pair of skiis across it for a bit, it should runn prime thanks for all the tips ill let u know whut worked best,
Feb 8 2008 7:32PM
0 0
All times are Eastern (-4)