Ski binding question

which model salomons are they? the Ti just stands for titanium so its hard to tell which binders you are referring to

I've had that problem to. As far as i know theres nothing you can really do exept crank up the DIN. THey just get old and cranking up the DIN has some added risk but not much

On  my s810 ti's, the same thing happened, and I figured out it was because the toepiece was loose. a good way to figure that out is to wiggle your foot side to side with ur ski off the ground, and you will probably feel/see it moving back and forth depending on how bad it is. To fix it, clip ur boots in when they are off your feet, and tighten down the screw on top of the toepiece until you can barely fit a credit card between the bottom of the boot toe and the binding toepiece. That is what the shop guy i knwo told me to do, and it worked fine. he also said this happened to alot of the Sally bindings from that year. i have to do this once a week or so, so you might want to bring a screwdriver to teh hill with you. I usually just borrow the ones in teh rental shop.

^borrow screwdriver from the rental shop, that is

great thanks
!