Taking bindings off of skis

you can do it yourself, but if the screws seem really tight do not keep trying to take them out and strip them. take em to a shop.

something you can do VERY easily just grab a screw driver

yea i've had both cases. time when using a screwdriver did the trick no problem and another when even a drill wouldn't do it and just almost started stripping the screw. so give it a shot... but if it doesn't seem right, don't force it and go to the shop instead.

Try it. If it doesn't work, go to a shop.

Very easy to do yourself, just apply lots of pressure when turning the screwdriver/using the drill to avoid stripping.

Just do it yourself, but don't do what I did which is retarded. Back when I knew shit, I took my solly bindings off and for some reason took out that big long bolt that holds the toepiece onto it's mounting plate. Long story short, I completely ruined the bindings. So yea just take out what you have to take out. And for Look/Rossi, at least the ones I ride you have to turn the wormscrew on the heelpiece and slide the heelpiece out to access the bolts. Also, use a long screwdriver (also known as a posi-drive I believe), and try to avoid using a drill cause I could see them stripping out easily.

its real easy if u use a screw gun....i would suggest that because if u use a normal screwdriver, i think u would strip the screws more easily

bad advice. the only reason anyone would use a normal screw driver on something as compared to a screw gun is so that there wouldn't be a possibility of striping the screws.

Use a screwdriver, and if that doesn't work take it to your shop

searchbar finally worked for me.  I'm in the same boat, i just need to take the bindings off and i'm giving them to a friend.  I wanted to know what was better drill or hand. screwdriver sounds like the way to go