Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
Getting the ar6 166, what bindings should i get
Posts: 126
-
Karma: 10
I ski mainly park, and i want something light...ideas?
Posts: 8407
-
Karma: 26
Posts: 5639
-
Karma: 40
Posts: 126
-
Karma: 10
shit wut was i thinking
ummm so yea the ar6 166
i ski 80% park
im 5'6 134 lbs
pretty aggressive
looking at the px12 jib....
thanks
Posts: 2114
-
Karma: 23
burton customs fo sho hah
Posts: 6842
-
Karma: 408
u said u want a light binding...px12 jibs are nto very light. I have them well i have the titaniums and they r pretty heavy, but im fine with them. They seem like shit bidnings, id rather look into some pivots if u can find them. P10, or P12 would be good for u. I know some ppl who have had trouble with their PX series, i have as well.
Posts: 126
-
Karma: 10
Posts: 6974
-
Karma: 79
They're look P10/12's. The PX series are total garbage. If you want a light binding pick up some Salomons.
Posts: 126
-
Karma: 10
so no one would recommend the Look PX 12 Ti Lifter Bindings
Posts: 126
-
Karma: 10
cuz i heard that they are very light
Posts: 2946
-
Karma: 49
they look good to me. Everyone has different experiences with bindings becasue some crank their DIN setting to the point where it breaks the binding and some just flat out go huge...so get one that takes abuse
Posts: 248
-
Karma: 251
if you still havent ordered your skis i would bump up the length a bit 166 is pretty small
Posts: 126
-
Karma: 10
but im 5'6 130 lbs....and im moving up from like a 160..
Posts: 6204
-
Karma: 52
flow, drake and northwave have some pretty dope bindings dog.
Posts: 11902
-
Karma: 1,018
i got my ar6's in 166 and i was 5'6 also, but then i grew about 2 inches since season started so i highly regret getting the 166s and definately need to be riding 171s now so if you want this ski to be used in the future, get the 171s.
Posts: 126
-
Karma: 10
allright...see im riding a 160 or 164 PE right now...but they are way too short...and im going to whistler over summer but i dunno...will i be able to adjust to the 171 in a short amount of time? but i will be hitting only jumps and rails, so the length might be good.
Posts: 7266
-
Karma: 127
my fks 120's are a bit lighter than my px12's, and apparently alot stronger. Try to find some p10's, p12's, or fks 120's if you have the cash
Posts: 126
-
Karma: 10
i thought the fks 120 were a race binding....
Posts: 1880
-
Karma: 368
the things that make the fks race bindings also make them good freestyle bindings.
a) there metal for the most part wich means thre tougher then shitty plastic ones
b) there made with lots of elastic travel so that tou can land sketch y and they wont let go unless you really get out of control.
and if u get the fks 120 u still get the pivoligy so that u can pop out of your toe pices
Posts: 5756
-
Karma: 49
get some tech nines there dope or mabee some burton customs
Posts: 23796
-
Karma: 13,012
i really like my s810 TIs
but i ve had some trouble with the wing pieces on the nose, but its an easy fix
All times are Eastern (-4)
