Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

My long story short style dropin

profile picture
skiwoj
Posts: 2286 - Karma: 52
im almost finished with my dropin, designed after the one in lss, heres a pic
Click for larger image

i just have to adjust the angle and put the plywood on the front and some decking on the top
Dec 23 2006 2:13PM
0 0
profile picture
ragadytrees
Posts: 551 - Karma: 27
witch way do u go
Dec 23 2006 2:35PM
0 0
profile picture
skiwoj
Posts: 2286 - Karma: 52
-----> that way, and the angle used to be too steep but i just adjusted the angle about 5 minutes ago so its good now
Dec 23 2006 3:42PM
0 0
profile picture
HeathR
Posts: 4357 - Karma: 1,379
not bad good work. Too the right would def be way too steep
Dec 23 2006 3:45PM
0 0
profile picture
skiwoj
Posts: 2286 - Karma: 52
its about the same slope on both sides now so its all good
Dec 23 2006 3:56PM
0 0
profile picture
ct
Posts: 2076 - Karma: 99
i think the ladder could be steeper, for the purpose on transportation unless your just using in your backyard
Dec 23 2006 6:23PM
0 0
profile picture
steezyjibber
Posts: 15967 - Karma: 11,016
im guessing its for the rail in the background?
Dec 23 2006 7:43PM
0 0
profile picture
skiwoj
Posts: 2286 - Karma: 52
its for my 20' a frame, and my 16' flat rail, i have a seperate, smaller drop in for the rails in the background
Dec 23 2006 9:09PM
0 0
profile picture
bobs
Posts: 4801 - Karma: 869
looks good. in the future making a cube with a vertical ladder and then attaching the ramp to one side maybe better. Makes it easier to transport for urban, or just store after the season. But that one doesnt look bad
Dec 24 2006 2:40PM
0 0
profile picture
chapz
Posts: 10182 - Karma: 66
sick, but maybe add support from one side to the other. i dont know if two 2by4s will hold
Dec 24 2006 7:47PM
0 0
profile picture
skiwoj
Posts: 2286 - Karma: 52
what do you mean?
Dec 24 2006 9:16PM
0 0
profile picture
fillup
Posts: 4904 - Karma: 568
the one in lss had like chains didnt it? so it would like fold up into a truck
Dec 27 2006 3:09PM
0 0
profile picture
skiwoj
Posts: 2286 - Karma: 52
mine is made with carriage bolts, so its completely collapsible
Dec 27 2006 7:57PM
0 0
profile picture
Xave
Posts: 2672 - Karma: 18
looks sweet, but as someone said you could make the ladder steeper
Jan 1 2007 2:45PM
0 0
profile picture
teleTay
Posts: 2320 - Karma: 186
sweet easy travel for that hidde urban
Jan 1 2007 5:56PM
0 0
profile picture
steevner
Posts: 4502 - Karma: 47
wow, thats so simple it's blowing my mind, i'm gonna build one, maybe tommorow. the comment that said it was made with chains made me realise how simple it was.
Jan 1 2007 9:54PM
0 0
profile picture
steevner
Posts: 4502 - Karma: 47
btw, how tall is it and how much wood was reuired (ballpark figures are fine)
Jan 1 2007 10:55PM
0 0
profile picture
skiwoj
Posts: 2286 - Karma: 52
yeah, it was really easy, it only took a combined total of about 3 or 4 hours, make sure yours is adjustable, i would be using it now but all the snow melted last night
Jan 1 2007 10:55PM
0 0
profile picture
steevner
Posts: 4502 - Karma: 47
how would one go about building it adjustable? I'm prob buildin  one tomorrow.
also how much did it cost to make approximately
Jan 5 2007 9:39PM
0 0
profile picture
skiwoj
Posts: 2286 - Karma: 52
since its all put together with carriage bolts, you can just drill a hole at another part on the horizontal board, and bring the two sides closer together, making it steeper

and as far as price..lets see, 4-10ft 2x4's, and maybe 9-8ft 2x4's, and a whole bunch of screws and 12 4 inch long 1/2 in. thick carriage bolts, and the plywood for the front, and i used decking for the top, so i will try to calculate the total real quick
Jan 5 2007 10:07PM
0 0
profile picture
skiwoj
Posts: 2286 - Karma: 52
i believe it cost me around 65$ but my dad works at lowes so he gets a discount on stuff, but i would plan on spending around 75-80$, depending on the cost of lumber where you are, and i got an extra few 2x4's, so 11-8ft. 2x4's sounds like a better idea then 9
Jan 5 2007 10:11PM
0 0
profile picture
steevner
Posts: 4502 - Karma: 47

thats a lot of wood, i'm planning on getting 7 12 ft  2x4's.
what about the elements? whats gonna stop it from rotting

Jan 6 2007 11:20AM
0 0
profile picture
skiwoj
Posts: 2286 - Karma: 52
i might put some deck waterproofing on it, but for now i just keep it under a tarp cause its raining and theres no such thing as snow on the east coast
Jan 6 2007 11:28AM
0 0
profile picture
steevner
Posts: 4502 - Karma: 47
I just dropped 115$ (cdn) at home depot on supplies to build a drop in like yours. The wood was only half of it though! It was the fixtures and screws that got me, a bunch of l-brackets and some decking screws can cost a lot more than you think
Jan 6 2007 5:13PM
0 0
profile picture
snowdiver
Posts: 668 - Karma: 12
how sturdy is that?
Jan 6 2007 10:02PM
0 0
profile picture
skiwoj
Posts: 2286 - Karma: 52
its insanely sturdy, i cant even rock it back and forth at all
Jan 6 2007 10:12PM
0 0
profile picture
steevner
Posts: 4502 - Karma: 47
Do you think chains will change the structural integrity?
Jan 6 2007 10:39PM
0 0
profile picture
HeathR
Posts: 4357 - Karma: 1,379
i would imagine they would make it a little less stable cuz they only stop movement in one direction.
Jan 6 2007 11:02PM
0 0
profile picture
skiwoj
Posts: 2286 - Karma: 52
wait, your using chains? where would you put them? where i have the horizontal 2x4 like half way down?
Jan 7 2007 12:31AM
0 0
profile picture
steevner
Posts: 4502 - Karma: 47
quite
Jan 7 2007 12:58PM
0 0
profile picture
Lineskiah11
Posts: 2029 - Karma: 21
they might a little bit but it seems as though the base is so wide on the ramp that it wont be that big of a deal. so i wouldnt worry about it
Jan 7 2007 5:42PM
0 0
profile picture
steevner
Posts: 4502 - Karma: 47
how wide is the one in the pic?
Jan 10 2007 6:25PM
0 0
profile picture
skiwoj
Posts: 2286 - Karma: 52
i think 39"
Jan 10 2007 7:29PM
0 0
All times are Eastern (-4)