Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Bindings On Seths

profile picture
Kev-Hal
Posts: 1297 - Karma: 91
I ask you the free ski gurus a question about bidnings...

I am buying some '07 seth's. Should I buy these bindings below for them? Yes or no? Why? Any other binding that would be better? Thanks.

Click for larger image
AXIAL2 140 TI PRO Wide Brake
State of the Art skis take more power and direct underfoot contact for the active transmission
of energy to the skis and edges. Bindings now boost ski performance. Axial2 Bindings not only boost performance, they boost skier safety too!

DIN: 5-14 ;
Skier's weight: 49-135 ;
Interface Height: 6/6mm ;
Lateral Elastic Travel: 45 ;
Vertical Heel Piece Elastic Travel: 25 ;

Jul 28 2006 1:56AM
0 0
profile picture
Kev-Hal
Posts: 1297 - Karma: 91
yeah I know it says bidnings!
Jul 28 2006 2:02AM
0 0
profile picture
titsLOL
Posts: 7485 - Karma: 396
I think i'm gettin those bindings for next season if that helps. Haven't decide what ski yet but probably seths.
Jul 28 2006 11:20AM
0 0
profile picture
Kev-Hal
Posts: 1297 - Karma: 91
BUMP!
Aug 7 2006 1:11PM
0 0
profile picture
leone
Posts: 2663 - Karma: 1,121
solid binding, i just got the same binding except it's the one with the old pivot heel, the axial 140 pro
Aug 7 2006 1:55PM
0 0
profile picture
cobra_commander
Posts: 16909 - Karma: 4,682
yes it would work but so would duct tape.
Aug 7 2006 2:16PM
0 0
profile picture
Kev-Hal
Posts: 1297 - Karma: 91
I am heavy, about 185- 195lbs. depending on how many shits I take that week.
I ski hard.
I have Salomon 912 ti's on my PE's, and they have been alright.
Aug 7 2006 2:44PM
0 0
profile picture
Kev-Hal
Posts: 1297 - Karma: 91
Word, thanks dude
Aug 7 2006 4:07PM
0 0
profile picture
Ryanvdonk
Posts: 12808 - Karma: 1,945
well seth uses 916s if that helps
Aug 12 2006 3:27PM
0 0
profile picture
MarkieR
Posts: 5337 - Karma: 98
get salomon s912ti's or 914's. you'd know if you need 916's, so you probably don't. those axials suck ass.
Aug 12 2006 4:44PM
0 0
profile picture
Kev-Hal
Posts: 1297 - Karma: 91
^why do they suck ass?
Aug 13 2006 10:00PM
0 0
profile picture
MarkieR
Posts: 5337 - Karma: 98
those shit's break all the time. i work in a shop and those are the most frequently repaired bindings on the face of the earth. i know everyone bashes salomon, but they're for sure the best.
Aug 15 2006 2:39AM
0 0
profile picture
traer
Posts: 690 - Karma: 12
916's or bust!
Aug 15 2006 2:00PM
0 0
profile picture
Kev-Hal
Posts: 1297 - Karma: 91
Okay, I think I can get some 914's for pretty cheap and brand new. Should I grab them?
Aug 15 2006 4:33PM
0 0
profile picture
Ryanvdonk
Posts: 12808 - Karma: 1,945
yeah if they're cheap, good bindings, don't have the problems with breakage that some people have with 912s (has to do with the plastic), just make sure you don't get the ones with the fat plates.
Aug 15 2006 5:19PM
0 0
profile picture
=FLO=
Posts: 1969 - Karma: 39
Salomon rear heelpiece screws are held in a plastic housing, i have been a ski tech in colorado for 7 years and i see broken salmon heelpieces every other day. The old axial heel was crap, but the new design is bomber. I rode the 140 all last year on my Ant, heel was solid. I did break a toepiece. Overall they are solid. Best binding in the world is the Salo 916, solid metal heel and indestructable, heavy and hard to get tho.
Aug 15 2006 6:18PM
0 0
All times are Eastern (-4)