Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Portable drop-in plans

profile picture
snowsnowsnow
Posts: 3343 - Karma: 23
i built a portable drop in for urban and stuff a while back, and it lasted one hit, then broke. does anybody know a website, thread, forum, or anything that has plans as to how to build a sturdy drop in? or if you know, could you post here? ive built a bunch of skate ramps, and im sure i could figure this out, but are there any secrets to it that make it real stable? like angled out back legs or anything? any help would be appreciated

blahblahblah
Jun 2 2005 11:45PM
0 0
profile picture
BrianM.
Posts: 179 - Karma: 10
try try again...

4FRNT.
Jun 3 2005 12:52AM
0 0
profile picture
pikupfulofsnow
Posts: 2077 - Karma: 9,696
contact "timboskier" and see if he will help you out.

Jun 3 2005 10:56AM
0 0
profile picture
R.Fahey
Posts: 8602 - Karma: 539
Triangle are stronger than squares. have cross beams that got like from the top of one part, to across and down on the other. how did you last one break?


Freezing Point 32
OVO helmets

"I would laugh if she was like a frankenstine on the front. But she's most likely a franken fine." - Shibber
Jun 3 2005 11:04AM
0 0
profile picture
d-loc
Posts: 7479 - Karma: 15
use a slide like we built... fast too



--------------------------------- ------------------------------------
"What the world doesn't understand," says Craven, still zigzagging through the parking lot, "is that what we don't have enough of is cold, not heat."

Some people talk it, some people live it, some people walk it-some people give it... deal with it.

D-Loc AKA Shaky Bones... Original, Unique, and One of a Kind.
Jun 3 2005 11:09AM
0 0
profile picture
mnjib
Posts: 5592 - Karma: 357
once i make one i will put up the planes.


snap crackle pop
Jun 3 2005 12:03PM
0 0
profile picture
t_walker
Posts: 934 - Karma: 37
build something that rests in the ben of a pick-up truck

---------------------
- Ski anywhere you can any time you can.

Newschool shirts/hats/sweat shirts and stuff:
http://www.cafepress.com/sopofreer ide
Jun 3 2005 12:39PM
0 0
profile picture
t_walker
Posts: 934 - Karma: 37
bed*

---------------------
- Ski anywhere you can any time you can.

Newschool shirts/hats/sweat shirts and stuff:
http://www.cafepress.com/sopofreer ide
Jun 3 2005 12:40PM
0 0
profile picture
Nine_Milla_Killa
Posts: 6783 - Karma: 23
Yep, we have one thats an old slide. Its really good and sturdy

Jun 3 2005 12:57PM
0 0
profile picture
pat-rickdaigle
Posts: 8556 - Karma: 1,020
seriously how hard can it be to make a drop in?







www.lonesomepineproductions.com
COM ING SOON

Jun 3 2005 1:04PM
0 0
profile picture
d-loc
Posts: 7479 - Karma: 15
well he wants it "portable" haha dont know why cuz that shit will be hard to make small and portable but still get a good launch



--------------------------------- ------------------------------------
"What the world doesn't understand," says Craven, still zigzagging through the parking lot, "is that what we don't have enough of is cold, not heat."

Some people talk it, some people live it, some people walk it-some people give it... deal with it.

D-Loc AKA Shaky Bones... Original, Unique, and One of a Kind.
Jun 3 2005 1:13PM
0 0
profile picture
Melvs
Posts: 15174 - Karma: 480
I am working on making something like a roller system (the line article about it inspired me). it should eliminate the need for a drop in. problem is making it cheap and workable, because the one used by the kids on the line site was something they found laying around (scraped converyor belt or something like that).

-Pat
www.wbpfilms.com
EST.
382
Jun 3 2005 1:22PM
0 0
profile picture
Phrosty
Posts: 9956 - Karma: 18
haha, you arn't crafty with wood working.




My weiner is probably harder than yours.
Jun 3 2005 1:31PM
0 0
profile picture
$westside$
Posts: 2934 - Karma: 18
yea....i building a bigger rail
Click for larger image



_________~Angus________________________ ________________________________
BR
A
D rAD

Waterveezy

after my first post, i knew i wanted to be a post whore~Frp1080
Jun 3 2005 3:04PM
0 0
profile picture
$westside$
Posts: 2934 - Karma: 18
yea...i need a bigger rail
Click for larger image



_________~Angus________________________ ________________________________
BR
A
D rAD

Waterveezy

after my first post, i knew i wanted to be a post whore~Frp1080
Jun 3 2005 3:05PM
0 0
profile picture
eastAR5
Posts: 15084 - Karma: 730
^ya you do

and a better jump would help too cause those plastic ones are pieces of shit and they move really easily.

Im gona make my drop in with 4 rotatable wheels on the side, so when its standing up its facing the back and if i wana transport it, I just flip it over onto the wheels and wheel it away

_______________________________________
A rmada 4 Life



$$$BOSTONBACKCOUNTRY$$$

Jun 3 2005 3:22PM
0 0
profile picture
alev
Posts: 7819 - Karma: 410
plus thats not portable angus



732 Crew

Mass Chaos
Jun 3 2005 7:39PM
0 0
profile picture
NickMartini
Posts: 7761 - Karma: 8,356
we have a sick one i will post some pics later

-Nick Martini
steptproductions.com
"Blue prints droppiing fall of 05"
liberty skis
Jun 3 2005 8:27PM
0 0
profile picture
Nine_Milla_Killa
Posts: 6783 - Karma: 23
There needs at least some snow on the in-run and jump to be considered skiing.

Jun 3 2005 9:21PM
0 0
profile picture
mintcrue
Posts: 1593 - Karma: 25
I'll send u and ne one else who wants an invite to the handrails cult, there is a whole thread on this

Strike 3

==Pink Panther / FCP / Mint Crue==

"Why'd you scare me like that dude!?"- Kublai
Jun 3 2005 9:22PM
0 0
profile picture
IanH
Posts: 541 - Karma: 21
yea handrails has a tone on drop ins

Jun 3 2005 11:57PM
0 0
profile picture
HSFCpro
Posts: 412 - Karma: 10
dude 2x4's plywood nails. use these materials to create a wieght bearing structure of about six feet tall and what ever ramp angle you like. not that hard you just have to be smarter than the wood your using.

www.highsocietyfreeride.com
your a good friend...to throw rocks at. TL.
AWwwh you picked her up, I was gonna mount her. stu
Jun 4 2005 1:30PM
0 0
profile picture
erknz
Posts: 943 - Karma: 256
HEINE TOOLS makes a metal drop in ramp that collapses down and fits in a snowboard travel bag...




All I need are some tasty waves, a cool buzz and I'm fine.
Jun 4 2005 2:15PM
0 0
profile picture
jksl
Posts: 12726 - Karma: 737
i would like to see this

-Jeff
Jun 4 2005 2:26PM
0 0
profile picture
Dakoulas
Posts: 2894 - Karma: 40
Click for larger image

Heres one my friend built, the drop in uses rollers.


Get a free Ipod Photo here -- http://www.freephotoiPods.com/?r=13562499
Jun 4 2005 2:32PM
0 0
profile picture
ItsPhil
Posts: 4625 - Karma: 11
that Heine tools thing sounds awesome

Jun 4 2005 2:33PM
0 0
profile picture
kiwisdontbounce
Posts: 663 - Karma: 12
mintcrue hook me up with that cult invite

and i gotta see a link or pic to that snowboard bag drop in

that is KEY

anything that doesnt require snow i need....because i barely get any...even in winter...and no ice rink for about 25-35 miles from my house

Jun 4 2005 2:47PM
0 0
profile picture
snowsnowsnow
Posts: 3343 - Karma: 23
well my woodworking skills arent the problem, ive built halfpipes, quarterpipes, etc...for skating and such. but building a dropin made of wood that can possibly collapse a little bit, yet give you enough speed, and withstand the forces of a skier pushing off the top is a bit tricky. i was just wondering if anybody had built something like this and if they had any pointers. i was thinking about using door hinges for the top so that the ramp can fold back

blahblahblah
Jun 6 2005 7:51PM
0 0
profile picture
nychka
Posts: 1787 - Karma: 61
mine will be finished tonight and i will post pics its fairly portable but huge

Jun 6 2005 8:00PM
0 0
profile picture
spyder1
Posts: 1529 - Karma: 11
i like the last pic posted the drop in goes right into a barn. smooth

Your Toughtest Competitor Lives in Your Head. Some days his name is Fear. Or Doubt. Or Gravity. Stomp his Ass Your Toughtest Competitor Lives in Your Head. Some days his name is Fear. Or Doubt. Or Gravity. Stomp his Ass I AM CANADIAN!!!
Jun 6 2005 10:38PM
0 0
profile picture
nychka
Posts: 1787 - Karma: 61
Click for larger image
i put some wooden supports on that arent shown in the pic. but im very happy how it turned out, the whole thing collapses and it is very sturdy

Jun 6 2005 10:42PM
0 0
profile picture
WIllW
Posts: 4578 - Karma: 2,512
yeh the line roller thing was awesome, jason levinthal found it in the trash i guess and it worked well, and yeh my drop in just broke, gotta make a new one

_________________________________________ _
______''
Anything that makes snow deserves more respect than my mommy''- Giray
I HATE NY PRODUCTIONS
Jun 6 2005 10:47PM
0 0
profile picture
nychka
Posts: 1787 - Karma: 61
^where is this pic/vid on the line site?


Jun 6 2005 11:16PM
0 0
profile picture
WIllW
Posts: 4578 - Karma: 2,512
it was in news a while back but i guess it got pushed off now

_________________________________________ _
______''
Anything that makes snow deserves more respect than my mommy''- Giray
I HATE NY PRODUCTIONS
Jun 6 2005 11:19PM
0 0
profile picture
JohnnyOldGuy
Posts: 350 - Karma: 35
I like how you said strong then posted pics of a ramp made out of pvc pipe.

Jun 7 2005 2:25AM
0 0
profile picture
DANETRON
Posts: 6671 - Karma: 137
to get one of those go check out the back of grocery stores, they allways have them chained up in the back for unloading the trucks, just sneak back there with a hack saw and cut the chain. Some stores dont have them tho and u have to be fast/stelthy

_______________________________________

Fuck off signature

Representin the 518



LINE KICKS ASS
Jun 7 2005 11:08AM
0 0
profile picture
ItsPhil
Posts: 4625 - Karma: 11
yea that roller thing levinthal found was so money


Jun 7 2005 11:25AM
0 0
All times are Eastern (-4)