Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Confusion with libertys

profile picture
vincepru
Posts: 5474 - Karma: 17
ok i wanna buy some choppers but ive heard alot of good and alot of bad. can i get some advice im confused on whether to get them or not

Apr 3 2005 11:18PM
0 0
profile picture
brokenback17
Posts: 308 - Karma: 11
do it

Apr 3 2005 11:18PM
0 0
profile picture
vincepru
Posts: 5474 - Karma: 17
do wat, get em or no get em ?

Apr 3 2005 11:21PM
0 0
profile picture
Mt_P0wDerJuNkIe
Posts: 1506 - Karma: 58
get um

Apr 3 2005 11:34PM
0 0
profile picture
hoodster
Posts: 245 - Karma: 19
i heard they are gay and shitty all around dont get them truss me.

hood sucks ass
Apr 3 2005 11:47PM
0 0
profile picture
Kev
Posts: 7411 - Karma: 35
i have new stealths and there holding up.



Dragon's Layer Member
Drop Cliff's, Not Bombs
Make Turns, Not War
Bomb Hills, Not People
Member #259
Apr 3 2005 11:47PM
0 0
profile picture
vincepru
Posts: 5474 - Karma: 17
i was told to put rivets in them once i got them to prevent the delaminating. should i?

Apr 4 2005 2:24AM
0 0
profile picture
PowderCanuck
Posts: 2626 - Karma: 10
well it can't hurt. That's a good idea no matter what ski you get really

______________________

"please use the search bar, convieniently located on the top right hand side of you screen unless you dislexic which in that case it could be anywhere" winterkid33

Screw this I'm going skiing
Apr 4 2005 2:27AM
0 0
profile picture
vincepru
Posts: 5474 - Karma: 17
how do i put them in, i dont wanna accidentaly fuck up the skis

Apr 4 2005 2:39AM
0 0
profile picture
PowderCanuck
Posts: 2626 - Karma: 10
Get a drill and some rivets and just fly at 'er

______________________

"please use the search bar, convieniently located on the top right hand side of you screen unless you dislexic which in that case it could be anywhere" winterkid33

Screw this I'm going skiing
Apr 4 2005 2:40AM
0 0
profile picture
PowderCanuck
Posts: 2626 - Karma: 10
maybe practive on some old skis

______________________

"please use the search bar, convieniently located on the top right hand side of you screen unless you dislexic which in that case it could be anywhere" winterkid33

Screw this I'm going skiing
Apr 4 2005 2:40AM
0 0
profile picture
vincepru
Posts: 5474 - Karma: 17
haha ok, where do i buy these rivets and how many should i put in in each tip/tail?

Apr 4 2005 2:45AM
0 0
profile picture
PowderCanuck
Posts: 2626 - Karma: 10
hardware store. As many as you like. 3 is a good number

______________________

"please use the search bar, convieniently located on the top right hand side of you screen unless you dislexic which in that case it could be anywhere" winterkid33

Screw this I'm going skiing
Apr 4 2005 3:08AM
0 0
profile picture
vincepru
Posts: 5474 - Karma: 17
aright. correct me if im wrong but rivets are what the PE's have right? sorry that was retarded but im just makin sure

Apr 4 2005 3:30AM
0 0
profile picture
jlm220
Posts: 157 - Karma: 10
yes..those are rivets..but ive seen kids pop those rivets out like no ones business...buy they will def. help delamination...do it

Apr 4 2005 4:10AM
0 0
profile picture
chillonhill
Posts: 1314 - Karma: 125
Use stainless steel or brass rivets

Apr 4 2005 4:13AM
0 0
profile picture
vincepru
Posts: 5474 - Karma: 17
aright thanks

Apr 4 2005 4:35AM
0 0
profile picture
ry.will
Posts: 3225 - Karma: 47
Don't worry about the rivets, the ones i just received from them came with rivets already in both pairs, they fixed the problems that youve been hearing about, the rivets solve the delam problem, the skis are super light and poppy, probably the best ski i've skiied, definitly the most versatile because of how light they are, def check them out

Apr 4 2005 7:05AM
0 0
profile picture
vincepru
Posts: 5474 - Karma: 17
im not buying them from liberty, im getting them from a guy on NS for $175

Apr 4 2005 4:26PM
0 0
profile picture
johanblaze
Posts: 4987 - Karma: 343
get the choppers or the c-notes.

Apr 4 2005 5:43PM
0 0
profile picture
Gnarshred
Posts: 5670 - Karma: 18
where can you buy them?? i havent found anywhere. i live in fort collins, so if anyone knows of a place...

_______________________________________

__

SKI TO DIE, LIVE TO SKI!!

...67% of highschool students are happy. We call them stoners. ~~Amy Pohler on weekend update.

Carpe The Diem.....Sieze The carp~pi
Apr 4 2005 5:46PM
0 0
profile picture
vincepru
Posts: 5474 - Karma: 17
get them from their site www.libertyskis.com , or some ppl on here have been sellin them for cheap. search it.

Apr 4 2005 6:53PM
0 0
profile picture
NickMartini
Posts: 7761 - Karma: 8,356
i bet if you email them you could send them to liberty and they could do it for you, and as for the skis, they are super duper light and have good side cut. They are not that tough but if you get a pair form liberty with rivets they are fine. Super goods skis, and next yuo can expect to see alot of change and some dank skis



-Nick Martini
Stept Productions
go buy 'to whom it may concern'
Liberty skis
So what?..... So lets dance!
He's going to duct tape it to his le
Apr 4 2005 7:35PM
0 0
profile picture
vincepru
Posts: 5474 - Karma: 17
so if i send them in they will put rivets in for meh? sounds good

Apr 4 2005 8:01PM
0 0
profile picture
troublemaker3
Posts: 1954 - Karma: 225
dont buy a ski you have to rivet togrther before you ride them , especially dont just drill holes in your skis , water will seep in make the wood rot then you have problems

Apr 4 2005 8:50PM
0 0
profile picture
Corkster
Posts: 2622 - Karma: 10
I dont know if i would personally buy liberty's until they get all the bugs worked out of them. I know some people that ride liberty and they have broken so many pairs this year. Id wait they will probobly have the problem fixed within the next 2 yrs.



Signatures are overated
Apr 4 2005 8:54PM
0 0
profile picture
vincepru
Posts: 5474 - Karma: 17
yeh but iim getting a sick deal on these
175

Apr 4 2005 9:11PM
0 0
profile picture
IHOP
Posts: 2155 - Karma: 19
Exactly what troublemaker said. Why the hell would you buy skis that you had to rivit to keep together!?

Apr 5 2005 12:09AM
0 0
profile picture
skimasterflex
Posts: 2064 - Karma: 16
besides rivets totally void the warrenty and that's the only thing Liberty has going for them to begin with.

'Skiing is 90% outfit, 5% equipment, and 5% ability' -Lief Storer
Apr 5 2005 12:19AM
0 0
profile picture
vincepru
Posts: 5474 - Karma: 17
when i get them i might sell them on ebay and get more than 175 and get invaders.
im getting these skis i never said i was gonna ride them. i was just asking. ihop thanks for all your help.

Apr 5 2005 12:26AM
0 0
profile picture
TheStamos
Posts: 9311 - Karma: 910
HAHA holy shit that was funny " put rivet's in them , its good for all ski's" HAHAHA holy fuck your an idiot.

Just dip your dong in paint and smack your helmet with it.
Apr 5 2005 1:31AM
0 0
profile picture
PowderCanuck
Posts: 2626 - Karma: 10
I didn't say that you should put rivets into everypair of skis you buy, but it can't hurt. You could do it do any pair of skis in the world, and it wouldn't hurt. It may or may not help, but it won't hurt. So it's not a bad idea. I haven't done it to my skis, but if someone wants to, I'm not stopping him

______________________

"please use the search bar, convieniently located on the top right hand side of you screen unless you dislexic which in that case it could be anywhere" winterkid33

Screw this I'm going skiing
Apr 5 2005 1:44AM
0 0
profile picture
TheStamos
Posts: 9311 - Karma: 910
Warranty is shot ... ok i understand but just branching off that .. If you have to put rivet's in your skis you might as well buy a pair of skis with your hard earned money thats not going to need them ( or come's with them from the factory ) in the first place.

Just dip your dong in paint and smack your helmet with it.
Apr 5 2005 2:48AM
0 0
profile picture
vincepru
Posts: 5474 - Karma: 17
ok, i just got a message saying that they are not the ones with problems, they are new ones from like a month ago. so these should hold up fine

DICE BOARDSHOP FOR ALL YOUR SKIING NEEDS
Apr 5 2005 12:20PM
0 0
profile picture
hoodster
Posts: 245 - Karma: 19
do not buy em im tellin u they blow ass liberty riders hate em truss me.


hood sucks ass
Apr 9 2005 8:15PM
0 0
profile picture
Jeff_Lo
Posts: 5809 - Karma: 263
this years hold up fine, but for next season they added a whole bunch to make the skis better, Andy Vacina the owner told me that they kept the same edge which was fine, where most of the problems were was with bindings ripping out, which mind did about after 4 months of hard use, and they did take a beating, but for next seasons they have added some energy/rubber thing into the tip and tail to help dampen vibrations at higher speeds and help prevent delam, they also added some sort of plate so where you mount the binding to prevent a rip out, and lastly they added some new kind of thing to the top sheet mostly for cosmetic reasons...but this years skis were still a great fun ski



I wish i was a gangster
Apr 20 2005 11:14AM
0 0
profile picture
R.Fahey
Posts: 8602 - Karma: 539
i would wait until they delam before i put rivets it. just let them be, then if shit start happeneind, epoxy it, and Rivet.

Freezing Point 32OVO helmets'Straight creeping on this bitch; Blonde haired chicken head.... she turned around and it was fuckin G to the Teezy.
Apr 20 2005 10:51PM
0 0
profile picture
kykelly05
Posts: 1295 - Karma: 11
vince u suck.. u should probally just quit. : )

Apr 20 2005 11:19PM
0 0
profile picture
spinks
Posts: 1426 - Karma: 129
we will not void your warrenty if you install your own rivits. As long as you dont blatenly fuck them up and are just trying to score a new pair.



...he died doing what he loved. He will always be rememberd as a great snowboarder, but more importantly as a great friend. In loving memory of Josh Malay. RED TEAM!
Apr 21 2005 12:55PM
0 0
All times are Eastern (-4)