Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
Anyone have any ideas to make the base of a rail?
Posts: 5024
-
Karma: 221
Hey i stole about a 15 foot pole from this construction site awhile back and now i need and idea on how im gonna mount it so i can acrtually slide it.... anyone have any ideas besides liek welding it?
What the hell were they doing with a car on the moon?... havent they gone far enough?
Posts: 116
-
Karma: 10
not really, on just try drilling into it and screwing wood and stuff onto it to make it stable
Posts: 8384
-
Karma: 38
how thick is it? i used a drill bit and put a screw in a 2x4 before. It ruined the drill bit, but hey, it was fun
Posts: 1724
-
Karma: 12
if it's metal i dont think you want to drill into it. just get shit to prop it up. For instance, we found an old fridge someone was throwing out, then drilled two small 2x4s into the side of it in the shape of a V. it kept the rail from moving around, we put the other end on the ground. you could also wait til there's some snowfall and just build a small base out of that. get creative.
Posts: 4010
-
Karma: 31
You should take a metals shop class at your local
high school. They'll teach you every thing you need to know.
Posts: 1287
-
Karma: 10
heres my tip steal some more medal pipes and weld four pieces to the rail so that it looks like a sawhorse. hopefully you know what a sawhorse looks like.
Posts: 116
-
Karma: 10
yea if you screw up on your first time when you try to make it, then you can always go stealsome pipes again
Posts: 642
-
Karma: 24
you can drill it to a 2x4 and make a wood base, thats whta we skate on, ive skiied it once too
Posts: 7837
-
Karma: 3,347
Get a hacksaw and just steal entire metal hand rails.
-=-=-=-=-=-=-=
-Dan
''An object at rest cannot be stopped!''
Posts: 7837
-
Karma: 3,347
Oops, make sure the supports are hollow though.
-=-=-=-=-=-=-=
-Dan
''An object at rest cannot be stopped!''
Posts: 4048
-
Karma: 12
werts has the right idea, i know you said without welding, but it is sooo easy, if you know anyone at your school(if you still go to school) then they will probably do it for you, otherwise, go to a car repair shop an dask them to do it, they'll for sure have a welder you just need to tell them what shape, and get four more small pipes
^^^Drop into the Pipe and Smoke it^^^
All times are Eastern (-4)
